| 10 • Troubleshooting |
|
| ||
|
| Problem: Nothing happens; fan does not move. | |||
| 1. | Turn power on, replace fuse, or reset breaker. | |||
| 2. | Loosen canopy, check all connections according to the wiring the | |||
|
|
| fan section. | ||
| 3. | Check the plug connection in the switch housing. | |||
| 4. | Push motor reversing switch firmly up or down to ensure that the | |||
|
|
| switch is engaged. | ||
| 5. | Pull the pull chain to ensure it is on. | |||
| 6. | Remove the shipping bumpers. | |||
|
| Problem: Noisy operation. | |||
| 1. | Tighten the blade bracket screws until snug. | |||
| 2. | Check to see if the blade is cracked. If so, replace all the blades. | |||
| 3. | Be sure that the shades are secure. | |||
| 4. | Check and tighten the screws in the switch housing mounting | |||
|
|
| plate and in the upper and lower switch housing. | ||
14 |
| Problem: Excessive wobbling. | |||
1. | If your fan wobbles when operating, use the enclosed balancing kit | ||||
| |||||
|
|
| and instructions to balance the fan. | ||
| 2. | Tighten all blade iron screws. | |||
| 3. | Turn power off, support fan very carefully, and check that the | |||
|
|
| hanger ball is properly seated. | ||
|
|
|
| ||
|
| If you need parts or service assistance, please call |
| ||
|
|
|
| ||
|
| http://www.hunterfan.com. |
|
| |
|
| Hunter Fan Company |
|
| |
|
| 2500 Frisco Avenue |
|
| |
|
| Memphis, Tennessee 38114 |
|
| |
|
|
|
|
| |
Hunter Fan Company |
