Hunter Fan 22720, 22710 manual Installing the Switch Housing

7-1. Connect the upper plug connector from the motor to the lower plug connector in the switch housing assembly.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

7-2. To attach the switch housing, thread the screws through the side holes of the mounting plate and tighten them securely.

Note: If you are installing the light fixture, proceed to 8 • Installing the Light Fixture. If you are not installing the light fixture, proceed with steps 7-3 – 7-4 to complete the installation.

7-3. read the finial with rod (from the sack parts) through the switch housing cap and into the switch housing.

7-4. Tighten the finial.

7 • Installing the Switch Housing

Side Holes

		Steps 7-1 – 7-2
Switch	11
Housing

Switch

FinialHousing

Cap

Steps 7-3 – 7-4

42012-01 • 03/09/05 Hunter Fan Company