Muratec MFX-C3035 manual About Duplex Printing, How do I autoduplex?

About Duplex Printing

Duplex (double-sided) printing can be done with this printer, which has the duplex unit built in as a standard. If the paper has low opacity (high translu- cency), then the printed data from one side of the page will show through to the other side. Check your application for margin information. For best results, print a small quantity to make sure the opacity is acceptable.

Note

Only plain paper, special paper and thick stock, 60–210 g/m2 can be autoduplexed. See “Specifications” on page 4-2.

Duplexing envelopes, labels, letterheads, postcards, glossy media or single side only papers is not supported.

How do I autoduplex?

Check your application to determine how to set your margins for duplex (double-sided) printing.

The following Binding Position settings are available.

1

2

1 3

1

2

3 1

1

2 1 3

If [Long Edge (Left)] is selected, the pages will be laid out to flip at the left.

If [Long Edge (Right)] is selected, the pages will be laid out to flip at the right.

If [Short Edge (Top)] is selected, the pages will be laid out to flip at the top.

4-30 About Duplex Printing