Muratec MFX-C3035 manual Performing Scan to Folder mode operations

Place the document in the ADF or on the original glass.

[Original Settings]-[Separate Scan]

A document can be divided and scanned separately.

The scan operation can be divided into several sessions, for example, when the document contains more pages than can be loaded into the ADF or when the original glass is being used to scan a document containing multiple pages, and then all scanned pages can be sent as a single document.

1

2 Press [Scan to Folder] to display the initial Scan to Folder mode screen.

3 With [Original Settings] in the [Settings] screen, set [Separate Scan] to [Yes].

4 Press the [Start] key.

The document is scanned.

5 Place the next document page on the original glass, and then press the [Start] key.

Repeat this step until all document pages have been scanned.

6 After all pages of the document have been scanned, press [Finish].

[Original Settings]- [Original Direction]

Specify the orientation of the document.

Item	Description
[Top]	Select this setting when the document is loaded
	with its top edge at the top.
[Bottom]	Select this setting when the document is loaded
	with its top edge at the bottom.
[Left]	Select this setting when the document is loaded
	with its top edge at the left (at the right when
	placed on the original glass).
[Right]	Select this setting when the document is loaded
	with its top edge at the right (at the left when
	placed on the original glass).

10-20 Performing Scan to Folder mode operations