Page 13
1
5
6
7
8
9
Conditions When Recorder Switched On
The recorder can be turned on in 3 different modes.
Initializing the recorder Conditions When Recorder Switched On
Actions
You can use the re-
corder at once.
Set up parameters of
"display and clock"
and "Automatic mea-
surement".
When recorder is
turned on.
The beeper sounds
once and the clock is
displayed. (Normal
mode)
The beeper is sounded
once and
E00
blinks.
The buzzer sounds
four times and
E00
blinks.
Condition
The recorder parameters
are stored
All parameters are lost.
The mode after reset. All
parameters are lost.
Parameters for the Display and Clock
This setting selects the display during automatic measurement sequence and
adjusts the clock parameters. The sequence number tells you which parameter
you are adjusting.
Display & key
Items
Sequence
number
Value &
range
0
1
00 ~ 99
01 ~ 12
01 ~ 31
00 ~ 23
00 ~ 59
Meaning of parameters
Displaying clock only in automatic measurement
Displaying pressure and result in automatic
measurement
Years (1997 ~ 2096)
Month
Day
Hour
Minute

Parameter

Selecting a sequence

number

Selecting a parameter

Sign of setting up parameters for display and clock

AUTO
ON/OFF
START
STOP

Sequence number