Page 8
Features Specifications
Specifications

Features

Portability
❏The recorder weighs approx. 215g (including batteries) and is compact.
❏The recorder is powered by LR6 type (AA) alkaline batteries. It is possible to
replace the batteries with Ni-Cd rechargeable batteries.
Operation & management
❏Clock and automatic measurement parameters may be set as needed.
❏If you connect to a computer and use the optional software, clock and
automatic measurement parameters can be easily set.
❏There are three modes for automatic measurement. Mode 1 and Mode 2 are
preprogrammed. Mode 3 is user programmable.
❏The recorder can transmit data to a printer directly. (An adaptable printer is
necessary to print the data. Refer to Section "Data Transmission to a Printer"
for specifications of the TM-2480 printer.)
❏The recorder has the built-in chargeable Li ion battery to keep the clock and
automatic measurement parameters.
Analysis
❏The time interval may be changed as needed.
❏The patient's blood pressure can be measured immediately at any time.
❏If you use the optional software, you can analyze the data extensively.
Smart measurement
❏The measurement time is shortened by proper exhaust velocity control.
❏The exhaust velocity adjustment is unnecessary, because the constant
exhaust is properly controlled.
❏In the automatic measurement cycle, these inflation values and stop values
at exhaust are controlled to reduce the measurement time.

Functions and Specifications

Blood pressure measurement
❏There are two ways of utilizing this device to record blood pressure measurements.
Automatic measurement - This automatic measurement works in accordance
with internal clock, preset time intervals and preset
mode. The measurement data is saved in memory.
Manual measurement -----Any time you press the
START STOP
key, a blood
pressure measurement is performed immediately.
The measurement data is saved in the memory.