Page 22
Attaching the Cuff and Recorder Initializing the recorder
Step 3
Attach the cuff directly against the skin so that the yellow mark is directly over
the brachialis artery and space it one inch above the inside of the elbow and
the lower edge of the cuff .
Step 4
Wrap the cuff so that the ring is within the slide range, it is flat and does not
slip down, but has room to insert two fingers. (If the ring is not within the slide
range, you need a proper cuff.)
Step 5
Position the air hose over the shoulder and affix it on the patient using adhesive
tape.
Step 6
Assemble the belt and carrying case.
Step 7
Position the belt so that the carrying case is on the right (left) side of the patient,
when a patient attaches left (right) arm cuff.
Step 8
Connect the air hose plug to the air socket.
Step 9
Place the recorder into the carrying case.
Caution
❏Do not disturb the cuff or air hose
during the measurement because
the recorder measures small
pressure variations.
Cuff
Ring
Slide Range of Ring
Ring
CuffBelt

Artery

Yellow mark

Ring

Tape

Appox. 3 cm ~ 5cm

(Approx. 1in.~ 2ins.)

Air socket

Main body

Air hose plug

SYS/INTERVAL
DIA
PULSE/TIME AIR
AUTO
ON/OFF
START
STOP

Carrying case