A&D Ambulatory Blood Pressure Monitor Deleting Old Data, Resetting the Recorder, Steps for reset

Deleting Old Data

Caution ❏ When the data is to be deleted, confirm that the data has already been transferred and saved. It is not possible to recover data that has been deleted.

❏It is not possible to completely delete data, if the START STOP key is released while the beeper sounds at Step 2.

	Steps for deleting old data
		Press and hold the		START STOP		key until		is displayed. If you want
Step	1
		to cancel this process, press the					AUTO ON/OFF	key.
		Press and hold the	START STOP		key once more until the beeper becomes silent.
Step	2

Resetting the Recorder

If the recorder does not work correctly, press the reset key. The recorder deletes all data and parameters. The internal system is initialized.

Caution ❏ All data and parameters are deleted and preset initial pa- rameters are reset.

❏Do not press the reset switch too hard. Press this key gently so as not to damage the components inside.

❏Keep foreign matter away from the reset switch hole.

	Steps for reset
		Open the battery cover.
Step	1
		Turn off the power switch.
Step	2
		Remove the batteries from the recorder.
Step	3
		Press the reset key gently.
Step	4
		Place new batteries in the recorder.
Step	5
		Turn on the power switch. The recorder sounds the
Step 6
		buzzer four times and E00 is displayed blinking.
		Set the parameters for the display and clock. Also,
Step	7
		adjust the parameters for automatic measurement.
Initializing the recorder			Page 19

Reset key

S
ST TAR
O	T
P

A

S

O

U

DI

S/

N

T

P

A

I

/

O

NT

OF

UL

E

F

S

T

R

VA

E/

L

I

M

0

0

E

1

2

1

3

A

4

2

5

I

6

7

R

8

9

ON

OFF

Deleting Old Data