Programming Your Universal Remote
Programming a Device using CODE LISTS
1. Find codes for each device and brand on page numbers shown below.
Device | Page |
TV | 12 |
VCR | 13 |
LaserDisc Player | 14 |
Satellite Receiver | 14 |
Cable Box | 14 |
Audio Equipment 15
PRESS
& HOLD
2.Press and hold the TV, VCR1, VCR2•LD, SAT•CABLE, or AUDIO button you want to set up. SAT•CABLEcan be programmed to operate other Satellite Receivers.
3.Enter the three digit code from the TV, VCR, Laserdisc Player, Satellite Receiver, Cable Box, or Audio code list.
4.Release the device key.
5.With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat
ENTER
YOUR
CODE
RELEASE
6.Enter your device codes here for easy reference.
TV CODE
VCR1 CODE
VCR2•LD CODE
SAT•CABLE CODE
AUDIO
5