RCA RCU500 warranty Operating Your TV, Turning the TV On and Off, Change Channels on the TV

Operating Your TV

Turning the TV On and Off.

1.Press TV to set the remote to control the TV (Most RCA, GE and ProScan models will only turn on when TV is pressed, not POWER.)

2.Press POWER to turn the TV on or off.

Change Channels on the TV

Press CHANNEL UP or CHANNEL DOWN to change channels on the TV or enter the channels as you would normally for your TV.

Use the buttons below to adjust features on your TV.

DISPLAY–Shows displays on the screen and clears menus from the screen.

MUTE –Switches the TV sound on or off.

PREV CH (PREVIOUS CHANNEL) –Changes back and forth between two channels. Select a channel using the number buttons and then select another. Press PREV CH to switch between the two channels.

If your TV has picture-in-picture, you may be able to use the following buttons to adjust PIP.

PIP (PICTURE-IN-PICTURE)–Turns the small picture on or off.

MOVE PIP –Moves the small picture to the next corner.

SWAP –Switches the channel in the small picture with the big picture.

FREEZE –Freezes or unfreezes the small picture.

You may want to experiment with the remote to determine all the buttons which will work with your TV.

6