![Setting Up Your Universal Remote](/images/new-backgrounds/28577/285775x1.webp)
Setting Up Your Universal Remote
Place Batteries in the remote
1.Remove the battery compartment cover.
2.Place 4 AAA batteries as shown,
matching the + and – end of each battery as indicated in the battery compartment.
3.Replace the cover.
Determine if your remote needs programming
Some RCA, GE and ProScan devices may already be preprogrammed.
1.Press the button of the device you want to control (for example TV).
2.If the device turns on, press another button to confirm (for example CHANNEL UP).
3.If the device you selected (TV) responds, you will not need to program the remote. If the device you selected (TV) does
not respond, you will need to program the remote (See pages
4.Repeat steps
3