Edition 10/2003
5
reference: TP50XSE2C
RS232 with DTR signal (printer on line)
9600 bauds Dip switchs set up on the printer
1 start ON
7 bits
Parity: even 1 2 3 4 5 6 7 8
1 stop
IBM mode
40 characters
CR = skip line
DTR signal: high: printer on line
low: printer off line
Paper error:
When paper roll is finished, the printer LED flashes fast, The data is stored in the memory
buffer of the printer until it is full.
Place another paper roll in the printer and press on the feed button until the paper is placed
properly and put back the top cover of the printer, the LED flashed slowly, press promptly on
the feed paper button, the printer starts printing the data stored in its buffer.
The LED stops flashing.
WhiteYellow
Back side
124
5
3
TX
DT
M
RX
Brown
Green
Terminal