CDV Software PROMI 1000 manual Colors and audible signals, Main menu, Code twice

Edition 10/2003

II.PROGRAMMING

A.Colors and audible signals

O2

G1

R1

The letter in bolt represents the LED color. (O for orange, G for green and R for red)

the digit represents the number of beep emitted.

The LED turns green and the 1 beep is emitted.

The LED turns Red and 1 beep is emitted.

B. Main menu

Important: Refer to the one page programming

Enter the master

code twice O2

Enter the master code twice (12345 default). The LED turns on to orange and 2 audible beeps are emitted.

A time delay of 2 minutes is set before the main menu is being shut down.

Once in the main menu, the LED lights on in orange.

Enter the 2-digit number of the menu to select a menu (from 00 to 13 ) R1

Once you enter in the menu, the LED lights in red.

Press on the # to exit from programming.

C. Menu 00 – Program badges and Pin codes

Press 00 to enter in badge & Pin code programming menu. The badges and Pin codes are stored in a slot (pigeon hole) defined as a user number.

Once in the badge programming menu, an automatic search is launch to select the next available user number.

Once a free user number is selected the LED lights on in Green G1

6