CDV Software PROMI 1000 Event printing, Door contact Alarm, Momentary output, Latched output

Models: PROMI 1000

1 23
Download 23 pages 17.29 Kb
Page 16
Image 16

Edition 10/2003

After 3 incorrect badge and/or PIN code are entered, the PROMI 1000 reader and the second proximity reader are locked out during 2 minutes and the alarm relay is activated. 2 audible beeps sound when the badge/PIN code are not valid. The LED lights on in red during the time of the lockout. The LED flashes in orange when the lockout is finished.

D. Event printing

When a badge is presented or a Pin code is entered, the user number code of badge or Pin Code date, hour and operating mode are printed.

Valid badge

User number

Code of badge

Date

Heure

521 Badge 022DC567 25.09.03 17.38 2

Invalid badge

xxx Badge 0236AD7C 25.09.03 17.40 2

The last 8-digit of the code of the badge are printed.

1000 events are stored in the memory buffer of the controller. The 1001 event replaces the first one.

E. Door contact - Alarm

The tamper switch activates the relay of the alarm when the front panel is removed. If the alarm time delay is different to 00, the door monitoring (door ajar or door forced open) is enabled:

When the door is opened, without being activated by the request-to-exit button or a badge, the alarm relay is activated after 1 second and the red LED lights on (forced open door).

When the badge or the request-to-exit button are used to open a door, if the door stays open, the open contact will trigger the alarm relay according to the door relay output.

Momentary output

The alarm time delay begins at the end of the door release time. If the door is maintained open after the alarm time delay, the alarm relay is activated and the red LED lights on. Closing back the door will deactivate the alarm relay and the LED start flashing orange.

Latched output

The alarm time delay begins only when the door stays open after ordering the closing by present- ing back the badge or pressing on the request-to-exit button, the alarm relay is activated and the red LED lights on. Closing back the door will deactivate the alarm relay and the LED flashes or- ange.

16

Page 16
Image 16
CDV Software PROMI 1000 manual Event printing, Door contact Alarm, Momentary output, Latched output