ÎSTEP 3:

Turn on the pressure washer (I). Pull trigger to operate unit. Liquid deter- gent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

ÎSTEP 4:

To rinse, move the VPS out of „Mix“ position and pull trigger to operate unit.

ÎSTEP 5:

Cleaning up: Always draw fresh wa- ter through the detergent tank or si- phon tube when done to flush any remaining detergents from the injec- tion system.

For best results see Cleaning Tips for specific information on how to clean different surfaces.

Always Use Kärcher Detergent for Best Results

Kärcher biodegradable detergents are specially formulated to protect the envi- ronment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a long- er life. For Kärcher Detergents, check your retailer or visit our website: www.soappac.com

￿CAUTION

Never use:

Bleach, Chlorine products and other corrosive chemicals

Liquids containing solvents (i.e., paint thinners, gasoline, oils)

Tri-sodium phosphate products

Ammonia products

Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.

Use of these items will void the war- ranty.

TAKING A BREAK ..five minutes or more

ÎSTEP 1:

Release trigger and engage gun safety lock.

ÎSTEP 2:

Turn pressure washer to OFF (0) po- sition.

English 9

Page 9
Image 9
Karcher K 3.48 M manual Taking a Break ..five minutes or more