ASSEMBLY INSTRUCTIONS
No tools required.
Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolt, and tighten with knob.
3
Step 3 Fill gas tank with unleaded gasoline. Do not use leaded gasoline.
Step 2 Check oil level. Oil level should always be between the “FULL” and “ADD” marks on the dipstick. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.)
Important! Do not run the engine with a high or low oil level as this can
cause engine damage. If you have fur- ther questions regarding the engine, please refer to the engine’s operating manual included with the unit.
