4.OPERATING YOUR PRESSURE WASHER
If you have followed all the instructions so far, you are now ready to have fun cleaning the KARCHER way!!!
•Turn on the supply water and press the Spray Gun lever (No.12) until the water flows freely and removes all air locks from the hoses.
•You may now attach the bayonet fit Spray Lance (No.16) or required accessory to the Spray Gun.
All accessories are bayonet fit, simply push in and twist
until they click into position !
•Once water is flowing through the machine, you may now switch on your Karcher Pressure Washer using the Power Switch (No.4)
•You can regulate the working pressure on the spray by turning the nozzle end of the Spray Lance (No.16) in a “+” or
•The working pressure can be read from the pressure gauge (No.15) on the Spray Gun.
WHEN USING YOUR KARCHER PRESSURE WASHER ON THE HIGH PRESSURE SETTING, THE RECOMMENDED WORKING DISTANCE BETWEEN THE NOZZLE AND THE OBJECT OR SURFACE TO BE CLEANED IS 30 CM. IT CAN BE CLOSER IF REQUIRED FOR PATIOS OR MASONERY.
When cleaning painted surfaces, ensure that the paint is sound and there are no signs or rusting or blistering.
It is your responsibility to check the suitability of the surface to be cleaned. Karcher (UK) Ltd. cannot be held responsible for any damaged caused.
11
