Recall
The "Recall" setting is used to call up the setting stored at addresses 0…9 and start the measuring process.
Please use the operating concept on page 2 for help with understanding the operating sequence.
Function | Button actuation | Display |
|
|
|
Switch on unit when depressed briefly
The upper display appears first, then the lower display shortly afterwards with the last function that was set
On
Off
KATHREIN MVG10
NG Store nr: 0
Select "Recall" main function |
| |
and | ▼ ▲ | |
no.: X | ||
|
Recall nr: 0
Use the arrow buttons to set the settings stored at an address (0…9).
Enter number directly and confirm with "Enter"
W X
- +
or
see above |
0 9
Confirm entry
26