FUNCTION MODE
The Function Mode gives you access to many other useful features on your ES3/5. To enter the Function Mode, press the Touch and Transpose buttons simultaneously. The LED indicators for both buttons will start flashing. While holding the Touch and Transpose buttons, press the appropriate Sound button to select the function you want to edit. Each button is assigned two functions as listed below. Press the same Sound button again to select the alternative function. To exit the Function Mode, press either Touch or Transpose button.
| Function | Display | See page | Function | Display | See page |
Piano | Brilliance |
| 20 | MIDI ch |
| 24 |
|
|
|
|
|
|
|
E.Piano | Tuning |
| 20 | Program # |
| 24 |
|
|
|
|
|
|
|
Organ | Voicing |
| 21 | Local Control |
| 25 |
|
|
|
|
|
|
|
Harpsi/Mallets | Symp. Reso. |
| 21 | Trans. Prg On/Off |
| 25 |
|
|
|
|
|
|
|
Strings | Temperament |
| 22 |
| 25 | |
|
|
|
|
|
|
|
Choir/Pad | Memory Backup |
| 24 | Channel Mute | - | 26 |
|
|
|
|
|
|
|
Bass | Lower Octave |
| 24 | Lower Pdl On/Off |
| 26 |
|
|
|
|
|
|
|
1. BRILLIANCE
Brilliance lets you adjust brightness of the preset sounds.
After selecting the “Brilliance” function by pressing the Piano button, use the Value buttons to change the value to the desired amount. The LED display shows the brilliance setting with a num- ber. “0” indicates the standard setting. Brilliance can be set between
Brilliance settings are global for all the preset sounds. You can not have an individual setting for each sound.
2. TUNING
Tuning allows you to adjust the piano’s pitch. You may need to adjust the tuning when you play with other instruments.
After selecting the “Tuning” function by pressing the E.Piano button, use the Value buttons to adjust the tuning. A tuning tone can be heard. The LED display shows the pitch for “A” in Hz (Hertz). For example, 40.0 stands for 440.0 Hz. The range of adjustment is from
427.0to 453.0 Hz. The factory preset value is set to the modern standard A = 440.0 Hz.
– 20 –
