INSTALLING / REMOVING SOCKET ON THE ANVIL
When removing the socket or bit from the tool, avoid contact with skin and use proper protective gloves when grasping the socket, bit or accessory. Accessories may be hot after prolonged use.
FORWARD / REVERSE AND TRIGGER LOCK LEVER
Be sure the trigger is released when changing the position of the lever. Always store the tool in the “LOCKED/OFF” position.
Always check the direction of the Cordless Impact Wrench's rotation before use.
When installing a socket, align the holes in the side of the socket with the dent pin. Press the socket on until the dent pin engages in the hole. To remove a socket, depress the dent pin through the hole using a small pointed object and pull the socket off.
OPERATING THE IMPACT WRENCH
TO SELECT THE DIRECTIONS OF ROTATION:
•To select forward Cordless Impact Wrench rotation, press the trigger lock from left to right flat against the Cordless Impact Wrench body.
•To select reverse, press the trigger lock lever in the oppo- site direction.
•The center position locks the tool.
TRIGGER | Reverse Lock Forward | |
LOCK | ||
|
Never tape the trigger switch down to provide continuous high speed. The tool may fail under such conditions causing fire or personal injury.
VARIABLE SPEED TRIGGER SWITCH
MAINTENANCE AND CLEANING
Always remove the battery pack before attempting cleaning or maintenance.
THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH:
•The speed of the Cordless Impact Wrench depends on the amount of pressure you put on the trigger.
•The more pressure you apply, the faster the Cordless Impact Wrench will go.
•Release the pressure and the Cordless Impact Wrench will slow down.
TRIGGER 
SWITCH
This Cordless Impact Wrench is lubricated before it leaves the factory. This lubrication should last for the life of the tool. No further lubrication is required.
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.
Always clean the battery pack using only a dry cloth. Do not use liquids. Always unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth.
Never open the Cordless Impact Wrench case, battery pack or charger. Do not attempt to repair the Cordless Impact Wrench, battery pack or charger yourself. Opening any of these parts will void your warranty.
13 | 14 |
