Manuals / Kawasaki / Power Tools / Grinder

Kawasaki 840272 Personal Safety, Tool USE and Care, Service, Specific Safety Rules AND/OR Symbols

Models: 840272

1 11
Download 11 pages 45.64 Kb
Page 4
Image 4

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Avoid accidental starting. Be sure the switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

Remove adjusting keys or wrenches before turning the power tool “ON”. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enables better control of the power tool in unexpected situa- tions.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safe- ty shoes, hard hat or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use the tool if the power switch does not turn it “ON” or “OFF”. A tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safe- ty measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

5

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel may result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

Hold tool by insulated gripping surfaces when perform- ing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

SAFETY RULES FOR ANGLE GRINDERS

Never use this tool without the proper guard. The grinding wheel could shat- ter during use. Make sure the guard covers the side of the wheel facing you.

Never bounce the tool while grinding. This may crack the wheel.

Grinding metal will cause sparks! Keep them directed away from people and flammable materials. Always keep the guard positioned so that as much of the exposed disc as possible is pointing away from you.

Keep children and pregnant women away from the work area until the grind- ing is completed and the area has been cleaned up.

Always wear full eye, face and body protection. Wire bristles may break off and fly toward the user. Always wear ear protection when grinding in enclosed spaces. Noise level may be amplified in such locations and may cause permanent hearing loss.

Page 3 Page 5
Page 4
Image 4
Kawasaki 840272 instruction manual Personal Safety, Tool USE and Care, Service, Specific Safety Rules AND/OR Symbols
Page 3 Page 5

840272 specifications

The Kawasaki 840272 is a cutting-edge piece of machinery designed for a variety of applications, excelling in performance, durability, and advanced technology. This model is particularly favored in industrial and construction settings, highlighting Kawasaki's commitment to quality engineering and user-friendly design.

One of the main features of the Kawasaki 840272 is its powerful engine, which delivers exceptional horsepower and torque. This ensures that the machine can handle heavy loads and challenging terrains with ease. The engine is designed for efficiency and reliability, contributing to longer operational life and reduced maintenance costs.

In terms of technology, the Kawasaki 840272 is equipped with an advanced hydraulic system that allows for precise control and responsiveness. This feature is crucial for operators who need to maneuver the machine in tight spaces or perform delicate tasks. The hydraulic system also contributes to improved overall efficiency, making it suitable for intensive work cycles.

Another characteristic that sets the Kawasaki 840272 apart is its ergonomic design. The operator’s cabin is spacious and equipped with adjustable seating, intuitive controls, and excellent visibility, ensuring comfort during long hours of operation. The layout of the controls is designed to minimize operator fatigue while maximizing productivity.

Safety is a paramount consideration in the design of the Kawasaki 840272. The machine comes with various safety features, including advanced braking systems, rollover protection, and emergency stop functions. These features enhance operator confidence and reduce the risk of accidents on the job site.

The Kawasaki 840272 also boasts a robust build quality that withstands harsh environmental conditions. Its materials are chosen for their strength and resilience, ensuring the machine performs reliably even in demanding scenarios. Additionally, it features easy access points for maintenance, allowing for quick inspections and servicing.

Finally, the Kawasaki 840272 is designed with fuel efficiency in mind. It incorporates technologies that reduce fuel consumption while maintaining optimal performance. This not only lowers operating costs but also minimizes the environmental impact of the machine.

In summary, the Kawasaki 840272 combines powerful performance, advanced technology, user-centric design, and safety features, making it a top choice for professionals in various industries. Its reliability and efficiency position it as a leader in its class, catering to the needs of modern operations.