SAFETY RULES FOR THE WAXER/POLISHER
Always wear safety goggles or eye protection when using this tool. Use a
dust mask or respirator for applications which generate dust.
ALWAYS hold the Cordless Waxer/Polisher with BOTH hands.
Secure the material being worked on. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injury.
Check to see that keys and adjusting wrenches are removed from the Cordless Waxer/Polisher before switching the tool “ON”. Keys or wrenches
can fly away at high velocity striking you or a bystander.
Keep the ventilation openings clear of dust, hair, paper or any other items that may restrict air flow.
Keep hands away from moving parts.
Keep clothes or long hair away from spinning pad.
Disconnect the plug or remove the battery pack from tool and place the switch in the locked or “OFF” position before making any assembly adjust- ments, changing accessories, performing any inspection, maintenance or cleaning procedures. Such preventive safety measures reduce the risk of start- ing the tool accidentally.
Do not use the Cordless Waxer/Polisher if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.
Maintain labels and nameplates on the Cordless Waxer/Polisher. These carry important information. If unreadable or missing, contact Alltrade for a replacement.
SYMBOLS
IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | EXPLANATION | ||||||
|
| V | Volts | Voltage (Potential) | ||||
|
| A | Amperes | Current | ||||
| Hz | Hertz | Frequency (Cycles per Second) | |||||
| W | Watt | Power | |||||
| Kg | Kilograms | Weight | |||||
|
|
|
|
|
|
| Alternating Current | Type of Current |
|
|
|
|
|
|
| Direct Current | Type of Current |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| Alternating or Direct Current | Type of Current |
|
|
|
|
|
|
| Earthing Terminal | Grounding Terminal |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| Class II Construction | Denotes Double Insulation |
| min | Minutes | Time | |||||
|
| s | Seconds | Time | ||||
| Diameter | Size of Drill Bits, | ||||||
|
|
|
|
|
|
|
| Grinding Wheels, etc. |
|
|
|
|
|
|
| No load speed | |
.../min | Revolutions per Minute | Revolutions, Surface Speed, | ||||||
|
|
|
|
|
|
|
| Strokes, etc. per Minute |
1,2,3, … | Ring Selector Settings | Speed, Torque or Position Settings | ||||||
7 | 8 |
