Keating Of Chicago 028951 service manual I Introduction, Ii Installation

I INTRODUCTION

GENERAL

Keating Top-Side™Cookers are designed to give maximum production efficiency, delivering high quality food products. The following design features are incorporated into Keating Top-Side™Cookers.

STANDARD

FEATURES

λ Stainless steel control panel λ Stainless steel head cover

λ MIRACLEAN® cooking surface λ Solid State Thermostat

λ Adjustable cooking height, from 1/8'' to 11/2'' (3mm to 38mm)

λ Locking mechanism for micro-level

STANDARD

ACCESSORIES

λ Proprietary USDA and UL listed polymer cooking sheets (1)

∞ NOTE: Keating of Chicago, Inc. (manufacturer) reserves the right to change specifications at any time.

COOKING HEAD

SPECIFICATIONS

Each Top-SideTMcooking head is designed to be connected to a 208, 220 or 240 volt single phase line.

	HEIGHT	WIDTH		DEPTH		WATTS	AMPS		kW
	3 5/8"	10 1/ "		20"		4,000	18		4.8
	(92mm)	(267mm)		(508mm)		@220V	@220V
STANDARD
TOP-SIDE™
COOKERS
λ	Sizes: 1 to 6 heads.
λ	Mounting: Can be mounted to any standard
	MIRACLEAN®		gas or electric 30'' (762mm) deep
	griddle (24'' deep plate / 610mm) up to 72" wide (up to
	6 heads maximum). Front trough only griddles are
λ	preferred for multiple heads.
	Cooking Surface: 10 / '' (267mm) wide x 20'' (508mm)
			1		2
	deep (per cooking head).
λ Number of heads: One head can be used for every 12''
	(305mm) of plate width. Each Top-Side™cooking head
	will be positioned over a griddle thermostat to ensure
	peak efficiency.
λ	ETL and ETL Sanitation listed.							1

SAFETY

PRECAUTIONS

WARNING

THIS SYMBOL WARNS YOU THAT SERIOUS BURNS OR OTHER INJURIES MAY RESULT IF SAFETY INSTRUCTIONS ARE NOT FOLLOWED.

λ DO NOT SUBMERGE THE TOP-SIDE™COOKING HEAD IN WATER.

λ CLEANING CHEMICALS OR UTENSILS USED FOR CLEANING GRIDDLES WILL DAMAGE OR DESTROY THE POLYMER COOKING SHEET.

λ NEVER USE A WATER JET TO CLEAN.

II INSTALLATION

This Top-Side™Cooker MUST be installed on a Keating griddle only. Failure to do so voids the warranty.

The Top-Side™Cooker must be installed, inspected, calibrated and serviced by qualified, certified and/or licensed service personnel. Contact your dealer for assistance.

DAMAGE DURING

SHIPMENT

The Top-Side™Cooker has been assembled, tested and inspected at the factory. Upon arrival, the complete Top- Side™ Cooker should be thoroughly checked for any damage that may have occurred during shipment.

What to do if equipment arrives damaged:

VISIBLE LOSS OR DAMAGE- Be certain to note this on the freight or express receipt and have it signed by the delivery person.

FILE CLAIM FOR DAMAGES IMMEDIATELY- Regardless of extent of damage.

CONCEALED LOSS OR DAMAGE- If the damage is noticed when the equipment is unpacked, notify the freight company immediately, and file a “concealed damage claim”. This MUST be done immediately. Be sure to retain the shipping container for inspection.

Keating does not assume responsibility for loss OR damage incurred in transit.

INSTALLATION

On new installations, your Top-Side™Cooker has already been factory installed, tested leveled and inspected. Top-Side™Cookers cannot be mounted onto existing Miraclean® griddles.