Failure to do so may cause the drain lines to clog up. NOTE: If the pump shuts down, turn it off and let the motor cool. Push the motor reset button located on the filter panel. Check filtering procedure or clean tub and paper if needed.

6. Let swirling action rinse down fryer.

7. Fully drain fryer.

NOTE: Pump should be run for at least 30 seconds after crumbs are removed from fryer. This will help prevent blockage in the drain lines.

8. Close drain valve by pushing in the large black knob and locking it into place and completely refill fryer. Refer to Figure 6.

NOTE: The drain valve handle controls fryer’s Main Power Switch. If drain valve is not fully closed and locked, fryer will not operate. See Figure 6.

9. Turn pump switch to the “OFF” position. Close return valve by pushing in the small black knob completely, after turning OFF the pump switch (for units with more than one fryer or central filter). See Figure 7.

D. CLEAN UP

WARNING

Filter drawer and pipes will remain hot following filtration. Allow the unit to cool down before clean up. Failure to do so may result in serious injury to the operator.

See 1-4 on page 1.

5. Remove crumb basket.

6. Push down on the 2 tension arms on the hold down ring, rotate 90°, and remove.

7. Remove the used filter paper and discard.

8. Remove sump screen.

9. Throughly clean the entire filter tub and all components. NOTE: Tub and components are diswasher safe.

10. Prepare drawer for next use (see section A “Preparing the Filter Drawer”).

NOTE: Instructions for cleaning the fryer are in the Operating Section of the Fryer Service Manual.

E. DISCARDING THE OIL

NOTE: The 6 foot hose provided with the filters should be used to discard the oil ONLY. DO NOT use the filter assembly to transport hot oil. DO NOT remove filter tub containing hot oil!

1. Prepare the filter drawer (see section A).

NOTE: Acidox is not needed when discarding the oil.

2. Prepare the oil (see section B).

3. Connect the hose to the right side of the filter assembly in the front. See Figure 8.

FIGURE 6.

Return valve (small black knob) must be pulled to open when filtering and pushed closed when complete.

FIGURE 7.

BATTERY OF 2 FRYERS WITH SAFE & EASY FILTER. NOTE: ONLY 1 FRYER CAN BE

FILTERED AT A TIME

– 3 –

Page 4 Page 6
Page 5
Image 5
Keating Of Chicago 1-800 owner manual Clean UP, Discarding the OIL, See 1-4 on
Page 4 Page 6

1-800 specifications

Keating of Chicago 1-800 is renowned for its commitment to providing top-notch towing and roadside assistance services. With a strong presence in the Chicago area, this service operates around the clock, ensuring that help is just a phone call away for stranded motorists.

One of the main features that sets Keating of Chicago 1-800 apart is its rapid response time. The company understands the stress and urgency that come with car troubles, which is why they prioritize quick dispatch. When customers call, they can expect a team of trained professionals to arrive on the scene promptly, equipped with the tools necessary to handle a range of issues, from flat tires to engine failures.

The technologies employed by Keating of Chicago 1-800 further enhance their service delivery. The company utilizes GPS tracking to monitor their fleet, allowing for efficient routing and minimized wait times. This technology not only improves response times but also provides customers with accurate updates on the estimated arrival of their towing vehicle.

In addition to towing services, Keating of Chicago 1-800 offers a host of roadside assistance options. These include lockout services, battery jump-starts, and fuel delivery. This comprehensive approach signifies the company’s dedication to not just transporting vehicles but ensuring the safety and peace of mind of drivers.

Customer satisfaction is a cornerstone of Keating of Chicago 1-800's operations. Each team member is trained not only in technical skills but also in customer service, fostering a culture of empathy and professionalism. This focus on quality ensures that every customer interaction is positive, reinforcing the company’s reputation as a trusted provider in the industry.

With a commitment to integrity and reliability, Keating of Chicago 1-800 has built strong relationships with its clients. The company actively seeks feedback to continually improve its offerings. Furthermore, its transparent pricing model means customers are never caught off guard by hidden fees, fostering trust and loyalty.

In summary, Keating of Chicago 1-800 exemplifies excellence in towing and roadside assistance, driven by advanced technology, skilled personnel, and a customer-centric approach, making it a leader in its field.
Top Page Image Contents