Kelvinator KL72TT user manual Washing sequence

Washing sequence Using process

Wash timer

Water-filling selector handle

Overfilling sign

Wash selector Water-filling entrance Buzzer Spin timer

(To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer).

OFF

WASH TIMER

(Strong current, standard current)

STRONG

STANDARD

DRAIN

WASH SELECTOR

(The buzzer will ring when	(to set to below 1 minute,
the washing finishes)	first set to 2 minute then
	turn it back. it can increase
	the service life of the timer).
	OFF

OFF

MAX

BUZZER

SPIN TIMER

Wash

1.Water-filling selector

(1) Set the water-filling selector at the "WASH" side.	WASH	SPIN
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.

Figure 1

Figure 2

3.Put in the laundries. If the water quantity is insufficient, please add water.

4.Select the current.

Select the strength of the current according to the laundries. (Figure 3)

5.Select the washing time

Select the washing time according to the laundries. (Figure 4)

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

WASH SELECTOR

STRONG

STANDARD

DRAIN

WASH TIMER

OFF

WASH SELECTOR

STRONG

STANDARD

DRAIN

Figure 3

Figure 4

Figure 5