INSTRUCTIONS FOR CHARGING YOUR KEN-A-VISION

CORDLESS MICROSCOPE

1.Plug in the round pin adapter from the power supply to the back of your microscope.

2.Then connect the opposite end to a 110v (220v international) electrical outlet.

3.With 1 over-night charge you can use your microscope for up to 40 hours of continuous operation.

4.You do not have to fully discharge or drain the battery to recharge.

TECHNICAL SPECIFICATIONS FOR MODEL NO. T-1201C & T- 1202C

·Power Source Life: 500 Cycles (approximately 4-5 years depending on usage)

·Light Source: “Propietary Light Board” Technology Equivalent to a

20 Watt Bulb

·Power Source: Built-in rechargeable NiMH (Nickel Metal Hydride)

·“Light Board” Life 100,000 Hours

·Cool Operating Temperature Less Than 25°C (75°F)

·10 year limited warranty on microscope.

EQUIPMENT RATING:

DESCRIPTION OF INPUT OUTPUT CONNECTION

Should you need a replacement power supply, contact Ken-A-Vision or your deal- er. When using internationally, be sure to use the correct AC voltage either 110V, 220V, or 240V output voltage (catalog # VFPS230R-2 (230v) or VFPS1209300R (110v). Output voltage is 9 volt DC 300mA and a 2.5 mmV barreled styled cen- ter position plug. connection of:

The power supply/charger are made exclusively for the Ken-A-Vision Cordless Microscopes. Failure to use Ken-A-Vision parts will void the warranty of your microscope.

Note: This equipment has been tested and found to comply with the limits for UL Standard 61010A-1.

ENVIRONMENTAL CONDITIONS

This equipment is designed to be safe at least under the following conditions:

·indoor use;

·altitude up to 2 000 m

·temperature 5° to 40°C;

·maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C;

·main supply voltage fluctuations not to exceed +/-- 10% of the nominal voltage;

·transient overvoltages according to installation categories;

·Pollution Degree 2 in accordance with IEC661

Normally non-conductive pollution occurs. Occasionally, however, a temporary conductivity caused by condensation must be expected.

EQUIPMENT MAINTENANCE

All cordless microscopes should be recharged PRIOR to storage.

The battery type is NIMH (Nickel Metal Hydride) part # VFBATBU2

Should you need a replacement power supply/charger, or battery, contact your nearest Ken-A-Vision dealer.

INSTRUCTIONS FOR REPLACEMENT OF CHARGER

Remove the connector cable marked battery from the light board. Next remove the old NIMH battery and properly discard.

To replace the NIMH battery simply plug in the cables to the appropriate color codes as indicated below. Secure the velcro strips to the battery and affix to the bottom of your microscope.

CONNECTOR COLOR CODE

kav.instcman.cordless.pc.v2 Part# INS-SC50C

Page 2
Image 2
Ken-A-Vision T-1202C instruction manual Technical Specifications for Model NO. T-1201C & T- 1202C, Environmental Conditions

T-1202C, T-1201C specifications

Ken-A-Vision is renowned for its innovative educational and industrial visual products, particularly its T-series of digital microscopes. The T-1201, T-1202, T-1201C, T-1202C, and T-1200 models stand out for their versatility and advanced features, designed to enhance the learning and observation experience.

The T-1201 and T-1202 models are equipped with a powerful 3.1 Mega-Pixel camera that captures high-resolution images with incredible clarity. Both models feature a user-friendly interface that allows for easy navigation and operation, making them suitable for both educators and students. The digital outputs are compatible with various operating systems, including Windows and Mac, ensuring flexibility in application across various devices.

One of the standout technological features of these microscopes is the integrated LED illumination system, which provides consistent and adjustable lighting for enhanced visibility and detail. This is particularly useful in educational settings where accurate observation is critical. The T-1201C and T-1202C further elevate the user experience with built-in Wi-Fi, enabling wireless connectivity. This feature allows users to connect to tablets, smartphones, or computers effortlessly, fostering a more collaborative learning environment.

Each model in the T-series boasts a robust design, ensuring durability while maintaining portability. The T-1200 model is specifically designed with an emphasis on classroom use and comes equipped with comprehensive software that enables users to annotate, measure, and analyze specimens in real-time. The multifunctional capabilities of these devices make them invaluable tools for educators, providing an interactive platform for teaching complex scientific concepts.

The T-series models also offer various magnification settings, allowing users to adjust the focus based on their specific needs, whether for biological specimens, educational demonstrations, or industrial applications. The compact size and lightweight design make these models easy to transport, making them ideal for on-the-go academic outings or field studies.

In summary, the Ken-A-Vision T-1201, T-1202, T-1201C, T-1202C, and T-1200 digital microscopes are designed with advanced technology and educational efficacy in mind. Their features, including high-resolution imaging, integrated lighting, Wi-Fi connectivity, and user-friendly software, make them essential tools in modern educational and industrial environments, fostering curiosity and enhancing the learning experience for all users.