Kenmore 106.83202 owner manual Using the Controls, Power On/Off, Sleep, 6 15.2 cm Min. Clearance

•Do not block air openings or place air cleaner on soft surface such as bed or sofa. This could cause air cleaner to tip over, blocking air intake opening.

•Place air cleaner on a fiat, level surface at least 6 in. (15.2 cm) away from heat sources such as ranges or heaters.

•This product is intended for indoor use only.

NOTE: Before operating air cleaner, record you can replace it annually. To remove and

Replacement" section.

Using the Controls

Power On/Off

1.Plug into a grounded 3 prong outlet.

2.Press POWER ON/OFF to start the air cleaner.

3.Press FAN SPEED to select desired speed.

4.Press POWER ON/OFF to stop the air cleaner.

Sleep

Press SLEEP/LOCK to set the fan speed to Low for 8 hours. The air cleaner will then return to the previously selected setting.

6" (15.2 cm) Min. Clearance

date of installation on HEPA filter so replace HEPA filter, see the "Filter

Control Lock

Locks the controls to prevent accidental changing of the settings.

1.Press and hold SLEEP/LOCK for

5 seconds to set the Control Lock.

2.Press SLEEP/LOCK for 5 seconds to unlock the controls.

Filter Status Lights

The Pre-Filter and HEPA Filter status lights will help you know when to change your filters. The green status lights will move from New to Change at pre-set intervals. When the red Change status light is flashing, replace the filter as indicated. See the "Filter

Replacement" section.