Filter Replacement, Release tabs, 1 1.Bottom tab

Filter Replacement

Filter status lights will be red for Change

when it is time to replace either the Pre- Filter or HEPA Filter.

1.Press POWER ON/OFF to turn air cleaner off.

2.Unplug air cleaner or disconnect power.

3.Place fingers on front release tabs. Gently push tabs in and pull front grill forward to remove it.

4.Remove and replace the indicated filter. Install the new HEPA filter in the

same direction shown by the arrow located on the filter frame. Install the

new pre-filter by placing it on the tabs. Do not try to wash and reuse either the HEPA filter or the pre-filter.

1.Bottom tab

5.Place bottom tabs on front grill into slots in base of air cleaner. Push top of grill forward until grill locks in place.

6.Plug in air cleaner or reconnect power.

7.Press POWER ON/OFF to start the air cleaner.

8.Press RESET for 5 seconds to reset the light(s) and timer.

For most efficient operation of the air

cleaner, it is recommended that you replace the pre-filter every 3 months and the HEPA filter every year.

To order replacement pre-filters or HEPA filters, visit your nearest Sears store or:

TOLL FREE 866-640-7138 www.sears.com/partsdirect