INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
• Pliers (that open to 19/16"[39.5 mm])
• Flashlight (optional)
Tools needed for installation
• Open end wrench 17 mm and 13 mm
• Level
• Wood block
• Ruler or measuring tape
Parts supplied
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 13" (33 cm) or a
15.5" (39.4 cm) pedestal. Remember that the pedestal will add to
the total height of the unit.
CC>
Beaded strap Transport bolt hole plug (4)
Optional pedestal
This pedestal (with storage drawer) is available in several colors.
To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME ®(1-800-469-4663).
Alternate Parts
Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call Height Height with Number
1-800-4-MY-HOME ®(1-800-469-4663). Washer
If You Have You Will Need to Buy 13" (33 cm) 51" (130 cm) White 42842
Laundry tub or Sump pump system (if not already
standpipe taller available)
than 96" (2.4 m)
Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm)
tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)
Floor drain Siphon break, Part Number 285834;
additional drain hose Part
Number 8318155; and connector kit,
Part Number 285835
Drain hose too 4 ft (1.2 m) drain hose extension kit,
short Part Number 285863
Water faucets 2 longer water fill hoses:
beyond reach of 6 ft (1.8 m) Part Number 76314,
fill hoses 10 ft (3.0 m) Part Number 350008
13" (33 cm) 51" (130 cm) Bisque 42844
13" (33 cm} 51" (130 cm) Graphite 42846
15.5" (39.4 cm) 53" (135 cm) White 55842
15.5" (39.4 cm) 53" (135 cm) Bisque 55844
15.5" (39.4 cm) 53" (135 cm) Graphite 55846
15.5" (39.4 cm) 53" (135 cm) Pacific Blue 55847
15.5" (39.4 cm) 53" (135 cm) Champagne 55848
15.5" (39.4 cm) 53" (135 cm) Sedona 55849
Stack Kit
Are you planning to stack your Kenmore washer and dryer? To do
so, find the stack kit (8541503) in the drum of the matching
Kenmore dryer. Follow instructions included with the kit. See
"Location Requirements."