ROUTmNECARE FOR YOUR CARPET CLEANER
CLEAN THE NOZZLE
Unplug carpet cleaner from emectrica{ outlet.
Remove solution and recovery tanks to prevent possible leaks.
_Lift | up on top of nozzle | and | slide off cleaner. | |
Wipe debris off nozzle and front | of cleaner with | a | ||
damp | cloth. |
|
|
|
_Tilt | cleaner back, raising | front of cleaner off | _J |
floor. Slide nozzle up from bottom of cleaner.
Press on upper portion of nozzle until it snaps in place.
CLEAN THE BRUSHES
Unplug carpet cleaner from electrical outlet.
Remove solution and recovery tanks to prevent possible leaks.
Tilt cleaner back onto the floor, resting it on its side.
_Pull brush assembly firmly to remove.
Rinse brushes under running water. Shake brushes to remove excess water.
_Align posts on brush assembly (A) with slots in cleaner (B).
Turn brushes slightly to align square post (C) with square hole (D) in cleaner.
Press brush assembly firmly and snap in place.
B
D
22