Kenmore 114.85925 Replace TANK-IN-TANK System, ALL Surface Floor Cleaner Care, To Clean Filter

REPLACE TANK-IN-TANK" SYSTEM

\

Return filter/float assembly to Dirty Water Tank. To ensure proper fit, make sure the arrow on the filter/float assembly lines up with the Align Filter Front arrow on Tank- in-Tank".

Replace Tank-in-Tank TM System by inserting bottom first and tilting forward until tank latch fastens.

ALL SURFACE FLOOR CLEANER CARE

WARNING

To reduce the risk of Injury from moving parts unplug before

servicing.

NOTE: For best results, clean filter after each use and replace annually.

TO CLEAN FILTER

_unplug from electrical outlet.

Turn unit off and

Remove Tank-in-

Grasp tab on filter/float assembly and pull up to remove from tank.

Remove filter from filter/float assembly by grasping angled top of filter and turning counterclockwise. Lift filter up and out of filter assembly.

b._,l

Tank" System by pushing down on tank latch and tilting out from cleaner.

Remove any loose debris from filter by tapping the filter against a garbage can. NOTE: For additional cleaning, the filter may be rinsed under water (Diagrams a and b). Allow filter to air dry completely before use,

14