Kenmore 116.25512 Power-Mate Care, To Remove Belt, To Clean Agitator, Agitator Assembly, complete

POWER-MATE®CARE

Always follow all safety precautions when cleaning and servicing the Power-Mate".

! 'v, lWARNING

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting,

TO REMOVE BELT

1. Turn Power-

Mate ® upside

down.

2. Unscrew the

two (2) Power- Mate ® cover screws.

TO CLEAN AGITATOR

NOTE: In order to keep cleaning efficiency high and to preventdamage to your vacu- um, the agitator must be cleaned every_time the belt is changed.

The agitator must also be cleaned accord- ing to the following schedule:

Vac_uum ClQaner UsQ	Clean Agitator
HEAVY -	every week

3.Turn Power- Mate e right side up, Press handle release pedal and lower the swivel. Lift rear

latches up.

Side

Latch Latches

4. To remove cover,

grasp the sides and pull out.

(used	daily)
MODERATE -		every month
(used	2-3 times/week)
LIGHT	-	every2months
(used	I time/week)

IMPORTANT

Disconnect cleaner from electrical outlet.

Check and remove hair, string and lint build- up frequently in the Power-Mate ® agitator

and end cap areas.

Remove any dirt or debris in the belt path area or in the brush roller area.

5. Lift agitator assembly out and remove worn belt.

6. Check and

clean end cap areas. See

AGITATOR ASSEMBLY

for pictureof	End Cap
complete
agitator assembly.

Carefully remove any string or debris located on the agitator, or end caps.

Agitator Assembly

Belt Pulley_

Brush Unit

16