Kenmore 116.25513 Hood And Tool Storage Cover, Hose, Canister, t. Open the canister hood

CANISTER

t. Open the canister hood.

2.Check to see that the dust bag is proper- ly installed. See BAG CHANGING for instructions.

3, Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CHANGING for instructions.

HOOD AND TOOL

STORAGE COVER

It is normal for the canister hood and tool storage cover to come off when opened fur- ther than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstall.

CAUTION

Never open canister hood with the tool storage cover open. This will help to prevent damage from occurring to the canister hood andlor tool storage cover,

This canister is equipped with an on-board

storage area for a Power-Mate Jr.® attach- ment.

To lnstalh

Open the Power-Mate Jr.® storage cover.

Insert the Power-Mate Jr.', press down into place, and close the lid securely.

To Remove:

Open the storage cover. Remove Power- Mate Jr." from the storage area and use as needed (see ATTACHMENTS and ATTACH-

MENT USE TABLE).

HOSE

t.Line up the hose latch tab and notch in canister hood and insert hose into canister until it

snaps in place.	Latch
	Tab

To remove: Lift

hose latch tabNotch

upward and pull up on hose.

2, Insert handle into wand until lock button

snaps in place, Be sure hose is not twist- ed.

To remove: Press handle quick release buttonand pull up on handle.

	To store:
	Disconnect hose
	from wands and
	canister	to prevent
Lock	stress on hose
_--	during storage.
HenCe	Store hose in a
	loosely	coiled
Qu_k
	position	so the

hose covering is not stressed.

Power-Mate Jr."

Storage Cover

/