SUCTION | CONTROL |
| ||
The | suction |
|
| |
control | allows |
|
| |
you | to change |
|
| |
the | vacuum |
|
| |
suction | for |
| crease | |
different | fabrics | Suction | Suction | |
and | carpet |
|
| |
weights. Opening the control decreases | ||||
suction for draperies and lightweight rugs, | ||||
while closing the control increases suction | ||||
for | upholsteries | and carpets. |
| |
PERFORMANCE INDICATOR
When the
vacuum cleanerIndicator is running with
normal airflow, the light on the
performance
indicator is off.
The light comes on whenever the
airflow becomes blocked, If that occurs, check the disposable dust bag, motor safety filter and other possible clog locations shown in HOW YOUR VACUUM
To correct problem: See the TROUBLE- SHOOTING table.
NOTE: The light may come on when using certain attachments, due to reduced airflow through attachment..
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to protect the vacuum cleaner from overheating. If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically. This allows the motor to cool in order to prevent possible damage to the vacuum cleaner_
To correct problem: Turn the vacuum cleaner off and unplug the power cord from the outlet to allow the vacuum cleaner to cool and the thermal protector to reset. Check for and remove clogs, if
necessary. Also check and replace any
clogged filters.Wait approximately
thirty (30) minutes and plug the vacuum cleaner in and turn back on to see if the motor protector has reset.
PowerMate STORAGE
The lower wand has
a "U" shaped flange that slides into the
"U" shaped slot in the canister
The flange ailows the wands and PowerMate to be stored with the canister to conserve
storage space. The canister must be stored on end for this feature to be used
To attach the PowerMate, it must be in the fiat position as shown in the illustration Use the handle release pedal to place it in this position
The wand will slip out of the slot as it is lifted up for use and will slide into the slot as it is lowered for storage.
STAIR GRIP
During normal operation while the canister is in the horizontal position, the caster wheel rotates freely 360 °.
The Stair Grip feature aNows the caster wheel to lock in position when the canister is rotated 25° from horizontal
into a vertical position in order for the canister to rest on stairs.
t3
