POWERMATE CARE
Always follow all safety precautions when ped'orming maintenance to the PowerMate.
WARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before performing maintenance to the vacuum cieanero Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting,
TO REMOVE BELT
1. Turn PowerMate upside down
2. Unscrew the
two (2) PowerMate cover screws
3. Turn PowerMate right side up
Press handle release pedal and lower the swivel Lift rear latches up
Sideear
Latch Latches
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning effi- ciency high and to prevent damage to your vacuum cleaner, the ggjtator mu be.._!eaned eyer_ time the belt is
The agitator must also be cleaned accord- ing to the following schedule:
Vacuum Cleaner Use Clean Aqitator
HEAVY -every week (used daily)
MODERATE - | every | month | |
(used |
|
| |
LIGHT | - | every | 2 months |
(used | 1 timelweek) |
|
|
4. To remove cover,
grasp the sides and
pull ouL
5o Lift agitator assembly out and remove worn belt.
IMPORTANT
Disconnect vacuum cleaner from electrical outlet° Check and remove hair, string and lint
Remove any dirt or debris in the belt path area or in the brush roller area.
Carefully remove any string or debris located on the agitator or end caps.
AGITATOR ASSEMBLY
End Cap | Belt Path |
6o Check and
clean end cap
areas. See AGITATOR ASSEMBLY for picture of complete agitator assembly.
Brush Unit | End Cap.I |
17