Kenmore 116.31591 manual Dust BIN Emptying, Port IIflYI/ suction ports, Lock dust, Place

DUST BIN EMPTYING

WARNING

Always unplug power cord from electrical outlet before performing any service on vacuum cleaner.

TO REMOVE DUST BiN

1.Grasp the handle on the

top of the dust bin. Press the

dust bin release button.

2.Lift up and out to remove dust bin from vacuum

cleaner.

Upper	/		3. Remove any
Suction	---_-1_!	I	clogs that	might
			be located	in the

upper or lower

Port _IIflYI/ suction ports.

Lower

Suction II I I _LI

Port -_-_'_._

3.The door will swing

open and the debris will fall into the trash

container.

4. Shake the dust bin to

release any debris that

might hang inside the

dust bin.

5.After the dust bin is empty of debris, firmly close the door. Make sure you hear a "click" sound to indicate that the door is fully latched.

TO EMPTY DUST BiN

TO REPLACE DUST BIN

1. Place dust bin back into vacuum

cleaner by inserting

1. Hold dust binthe bottom first and over a trash

container.

tilting back.

2.	Press	the	dust	Door	2. Lock dust	bin in
				Release	place.
bin	door	release		Dust Bir
				Button
button				J	A noticeable	"click"
downward			to
					should be heard.
release		the	door.

-17-