Place LP Cylinder into the Cabinet
[] Unhook the cylindersupport ring and hold at top of cabinet.
[] Place the LP cylinderdown intothe tank support hole inthe bottom of the cabinet.Ensure
the valvefaces to the front.
[] Wrap the cylindersupport ringaround the top of the tank and hook to secure the LP
cylinder in place.
\
mAttach Regulator Hose Support Ring to Cabinet Side Panel
[] Remove the nut from the bolt on the inside of the left cabinet side panel, It's located
towards the top of the side panel near the front. See Inset 1.
[] Find the metal ring located on the hose of the regulator assembly and attach to the bolt on
the left cabinet side panel securing it with the nut. This will keep the hose away from
hot surfaces. See Inset 2.
DO Not Hook Up the LP Cylinder to the Regulator Assembly at this time,
Inset 1
Inset 2
Regulator Hose Support Ring