Attach Side Burner Control Panel to Hain Control Panel
[] Use 2 Phillips Head Bolts (M4x8mm) and 2 Lock Washers (M4) to attach the Side Burner Control Panel to the firebox as shown.
Phillips Head Bolt M4x8mm
Qty: 2
©
Lock Washer: M4
Qty:2
Attach Side | Burner | Control Knob | and | Side | Burner | Ignition | Wire | lower | left front corner of the | |||
[] | Slide the side burner | ignition | wire through | the hole | located | in the | ||||||
| Firebox | Assembly | and | over | the | side | burner igniter | connector. | See | Insets | 1 and 2. | |
[] | Push the | Control | Knob onto the valve stem. | See Inset 3. |
|
|
| |||||
Inset 3
Side Burner Control Knob
qty: 1 | 1 |
| |
| Inset 2 |
Inset 1
15
