!! | Remove | Firebox | from | Cabinet |
|
|
|
|
|
|
|
|
|
|
| |||
[] | Unscrew | and | discard | the | 6 | Phillips | Head | Bolts | and Washers | from the | corner | holes | of | the cabinet. | ||||
|
| Remove | the | crossbar. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| [] | Carefully | lift | the cabinet | up | from | the firebox | and | set on | cardboard. | Remove | all foam | packing from | |||||
|
| cabinet. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| [] | Cut | fastening | straps | on | lid | handle. | Raise | lid | and | remove | and | unpack | parts | inside | firebox. | ||
Crossbar
Install Control Knobs and Casters
[] Push the Control Knobs onto the valve stems. See Inset 1,
[] Place the Cabinet Assembly upside down and using 16 Phillips Head Bolts (M6x16mm) attach the 4
Casters to the Cabinet Assembly bottom. Use care to install each Caster into the correct position. See Inset 2.
Inset 1
Phillips Head Bolt M6x16mm qty: 16
r
Standard Caster | Swivel Caster |
Main Burner Control knob qty: 3
Locking Standard Caster
Inset 2
Locking Swivel Caster
lO
