Install[] UnscrewSide Shelfthe 2 PhillipsFrame Headto Fireboxbolts . 1/4" from the upper left and right corner holes in the right side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side shelf frame.
[] Slide the upper holes of the side shelf frame over the heads of the 2 Phillips Head Bolts and drop down.
[] Use 2 Phillips Head Bolts (M6x16mm) and 2 Washers (M6) to attach the lower holes in the side shelf frame to the firebox as shown in Inset 2. Tighten the upper bolts after the 2 lower bolts are tight.
[] Use 2 Phillips Head Bolts (M4x8mm) and 2 Lock Washers (M4) to attach the lower holes in the Side Shelf Front Panel to the firebox. See Inset 3,
Inset 1 | Inset 2 |
Phillips Head Bolt M6x16mm
Qty: 2
©
Lock | Washer: M6 | Inset 3 |
Qty: | 2 |
|
Phillips Head Bolt M4x8mm
Qty: 2
©
Lock Washer M4
Qty: 2
_I_ | Install | Heat | Diffuser, | Cooking | Grates, and Warming | Rack |
| front and back panels. | See | Inset | |||||||||||
| [] | Place | the | Heat | Diffuser into the firebox | between | the | ridges in the | |||||||||||||
|
| 1, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| [] | Place | the | Cooking | Grates | into | the | firebox. |
| The grate | bottoms | have | a small | knob | on | each | corner. | See | |||
|
| Inset | 2, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| [] | Insert | the | Warming | Rack | into | the | holes | of | firebox | side panels | as | shown, | See Inset | 3. |
|
| ||||
|
|
|
| Inset | 1 |
|
|
| Inset | 3 |
|
|
|
| Inset | 2 |
|
|
| ||
