Grill Head to Cart

ƒThis step requires two people to lift and position grill head onto cart.

ƒRemove the tie wraps securing regulator hose to underside of grill head. Pull hose and igniter wires out to side of grill head.

ƒCarefully lower the grill head onto the cart. Make sure the regulator hose and igniter wires are hanging outside the cart. Open lid and attach head to cart with (4) M6x13 screws and M6 compression washers.

ƒAlign back rail holes with holes on side panels and firebox. Attach back rail with (4) M4x10 screws.

M6X13 screw Qty: 4 pcs

M6 compression washer Qty: 4 pcs

M4X10 screw Qty: 4 pcs

2016142-40900319

Page 20
Image 20
Kenmore 146.1614221 manual Grill Head to Cart