Sideburner
ƒLoosen side burner in side shelf. (B ). To loosen, unscrew and remove two front screws holding sideburner in place. (A). Note: Do not loosen electrode screw.
ƒRemove the 2
ƒInsert valve stem through hole in fascia. (D) Attach bezel to fascia and valve face with previously removed 2 screws. Attach bezel with black mark facing up (E).
ƒPlace sideburner tube over the valve, making sure that valve is inside sideburner tube. (F)
ƒPush control knob onto sideburner valve stem. (G)
ƒReattach sideburner to sideburner shelf with the 2 previously removed screws. Replace sideburner grate. (H)
ƒConnect both igniter wires to the igniter module on the inside of the right fascia. To connect, push igniter wire tips onto pins in igniter module.(I)
ƒUnscrew igniter cap from control panel. Insert (1) AAA battery (provided in blister pack) into battery slot with positive end (+) facing outward. Screw igniter cap back onto panel. (J)
AB
AB
CD
CD
|
EF
EF
