Kenmore 153.318131 Wiring, Diagram, Njury,Or Property Damage, Installation Instructions contd

Installation Instructions (cont'd)

Converting the Element (cont'd)

_,WARNINGJ

Make sure the thermostat is flush against the tank, the terminal cover is in place, and the insulation is replaced. I Failure to do so can result in DEATH, SERIOUS BODILY

NJURY,OR PROPERTY DAMAGE.

10.Replace the insulation pad and tape on so that it completely covers the thermostat and element.

11. Replace the access panel.

12.Complete wiring to water heater, or if completed, turn "ON" electric power to water heater after filling tank with water.

1

ACAUTION

Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating ele- ment, the tank must be filled with water. Water must

flow from the hot water faucet before turning "ON" power.

Wiring	Diagram
STANDARD	WIRING FOR	TO ELECTRIC POWER SUPPLY
2 WIRE LEAD WATER HEATERS
240 VOLT SINGLE ELEMENT

RED

LOWER HI-TEHP

LiMiT SWITCH

LOWER HEATING ELEMENT

_OR3_OWA_S

12