Kenmore 153.335916, 153.335942, 153.335845 ELECTRICAL SYSTEM CHECK Use diagram on page, Cautioni

Troubleshooting Guide (cont'd)

ELECTRICAL SYSTEM CHECK (Use diagram on page 33)

_,CAUTIONI

Label all wiring before disconnecting an)" wiring; to ensure correct reconnection. Failure to follow this instruction I

could cause improper and possible dangerous operation, I

I resulting in DEATH, SERIOUS BODILY INJURY, ORI

t PROPERTY DAMAGE. ]

		Visually check that all components
No		are wired	correctly according to
i		wiring diagram on unit.
I
I
I
I
Correct by wiring according to dia-
gram.
	/
Go to Thermostat and Gas Supply L..L		NO	J
	V
Check section.

Yes!

forPilotheatis. lit and thermostat is calling

I

Yes

+

have 110/120 volts available (recep- Does power cord or power wiring tacle and/or unct on box)?

Supply 110/120			volts.		.....	NO
I Turi1	oN.				.....	No
Check at #1 for 1101120 volts to
ground.		No•			I
		I
		+				Yes
Replace switch.					]
Replace gas pressure				switch.
NOTE:		Requires		minimum	31/2"	No
_C.	for	natural			.....
			gas or 8" W.C. for

propane (L.E) gas to operate.

				I
				Yes
.i
F			t Is on/off	switch "ON"?
I				I
J				Yes
1"			I Bl°wer	mOt°r is running"	I
I
I
I
		/
		I' I Check at #2 for 110/120 volts toi
,-		-_ ground.		i
			I
			Yes
		!
a	i		#3 i7or 110/120 volts to ground.
		!
	i
	"-""	t	Unplug blower motor and check at
	'		I
	'		Yes

, +

Check wiring between # 2 and #3. ]_" No : ] Replace blower motor. ]

Yes

continued on facing page

34