Cycle time or

Signal lights

Cycle pads

Option pads

delay time display

 

 

 

NOTE: PF will show on the display the first time your dishwasher is connected to electricity or when electricity returns after prolonged failure. To clear the display, press the Cancel/Drain pad,

t, The ULTRA WASH TMSoi! Removal System is designed to remove food particles from the wash and rinse water, You only need to remove large chunks and bones

2, Properly load the top rack, bottom rack, and silverware basket,, See pages 13-17

3_ Spin both spray arms with both racks pushed back into place to make sure nothing prevents arms from turning freely,

4, Add detergent° See page 11.

5.Check the rinse agent dispenser. See page 12, 6, Push door firmly when closing and it wilt

automatically latch

7.Run hot water at the sink nearest to the dish- washer until water is hot Turn off water.

(See pages 8-9 for additional cycle and option descriptions,) Use Normal Wash to wash dishes now:

Press

You will see

(cycle time)

Use Quick Rinse now if you plan to wash dishes later:

Press

You will see

(cycle time)

Then use Water Miser when you wash prerinsed dishes:

Press

You will see

(cycle time)

Page 7
Image 7
Kenmore 15825, 15821, 15828 manual Cycle time or Signal lights, Delay time display