Kenmore 19501 manual Needle Posit$on buton

e Change the Presser Foot

Use the correct presser foot for the stitch you wish to sew. Consult the Stitch Pattern Chart and the detailed directions for sewing with the various presser feet.

To snap off

Needle

posit$on bu_ton

To Snap Off the Presser Foot:

1.Press the Up/Down Needle Position Button to raise the needle to its highest position.

2.Raise the presser foot.

3.Press the red button on the back of the foot holder. The presser foot will drop off.

To snap on

f

L j

To Snap On the Presser Foot:

1.Set the Pressure Dial at "3"

2.Place the presser foot so the hori- zontal pm on the foot lies rust

under the groove of the foot holder.

3.Lower the presser foot holder to lock the presser foot in place.

NOTE: If you do not hear the presser foot snap m place, press down on the presser foot holder firmly until you hear the snap.

23