Kenmore 19501 manual Oil the Underside Oil the Face Cover Plate, Do not Remove

Oil the Underside Oil the Face Cover Plate

Fig. 1

	1. Oil	at	those	points	indicated	by	short	arrows tn	the illustration	above.
Fig. 2	No other oiling Is required.
	DO NOT		REMOVE		the top	cover	or	base cover.	No customer	service is
	required	in	these	areas.

1, Tilt the machine head back.

2.Remove the bottom covers by loosening the two screws, A and B, under the free arm. !Fig, 1)

3, Oil at the arrows shown in the illustration. (Fig. 2)

NOTE : No other oiiing ts required,

92