Kenmore 19702, 19502 manual installing Your Freezer, Electrical Connection

installing Your Freezer

•Thisappliance is designed to be free standing only, and should not be recessed or built-in.

oPlace your freezer on a floor that is strong enough to support the freezer when it is fully loaded.

•Allow ,5.9inches(1,5cm) of space between the back and sides of the freezer, which allows for the proper air circulation.

•Locate the freezer away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. The recomended operating ambient temperature should be between 55°F(12.8°C) and 110°F(43.3 )°C.

®Avoid locating the freezer in moist areas.

•Remove shipping material including base

Cut the packaging strap, then take off the packaging box and the interior protective plastic bag. Removethe protective foams off the freezer and put them inside the upended

packaging box, uplift the freezer and remove the bottom protective pad under the freezer.

oAfter plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food inthe freezen

Electrical Connection

WARNING

Improper use of the grounded plug can result in the riskof electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service centen

Plug the freezer into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician.