SettingUpandAdjustingYourPhoneSETTINGUP

DESK/TABLETOP INSTALLATION

1) Plug the ACadapter cord into the 9 VDC input jack on the
back of the base.
Place the power cord so that it does not create a
trip hazard or become chafedand create a fire
or electrical hazard.
2) Plug the ACadapter into a standard 120 VAC wall outlet.
3) Charge the battery (refer to “Charging the Battery Pack,”
page 6).
4) Plug one end of the long telephone cord into the
TEL LINE
jack on the back of the base.
5) Plug the other end of the cord into yourtelephone jack
on the wall.
6) Place the base on a desk or tabletop. Then, place the handset
into the base. The base must lay down in the base as shown.
7) Raise the base antenna to the
vertical position.
3
SETTING UP

AND ADJUSTING YOUR PHONE

SETTING UP
TIP
Beforechoosing a location
foryour phone, read the
“InstallationConsiderations”
includedin the “Precautions
andImportant Safety
Instructions”brochure.
Useonly the Uniden AC adapter supplied with this phone.
DONOT use an outlet controlled by a wall switch.
I:...exv958final.vp
Fri Jun 19 20:14:53 1998
Color profile: Disabled
Composite Default screen