WALLINSTALLATION▼Standard wall plate mounting
This phone can be mounted on
a standard AT&Tor GTE wall
plate. Toattach the wall
mount adapter to the base:
1) Slide the wall mount adapter
into the notches at the top
of the base.
2) Pivot the wallmount adapter down and snap into place.
3) Plug the ACadapter into the base.
4) Wrapthe AC adapter cord around
the strain relief notch. Then,
put the ACadapter cord
inside the molded wiring
channel. Plug the
ACadapter into
a standard 120VAC
wall outlet.
5) Plug one end of the short telephone cord
into the
TEL LINE
jack on the base.
Place the telephone cord inside
the molded channel on the bottom
of the base.
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, chargethe batter y.
Referto “Charging the
Battery Pack,”page 6.
6) Place the base on the posts of the
wall plate and push downuntil
it is firmly seated.
4
HINT
Beforechoosing a location
foryour phone, read the
“InstallationConsiderations”
includedin the “Precautions
andImportant Safety
Instructions”brochure.
AC
Adapter
CAUTION
Placethe power cord so
thatit does not create a
triphazard or where it
couldbecome chafed
andcreate a fire or
electricalhazard.
!
DONOT use an outlet
controlledby a
wallswitch.
I:...exv958final.vp
Fri Jun 19 20:51:58 1998
Color profile: Disabled
Composite Default screen